* Oxygen Content Display in PPM.

* Adjustable alarm level in separate LED display.

* Switchable alarm signal at Alarm Value.

* RS-232-PC Interface connection.

* Integrated and switchable gas flow pump.

* Simplified controlling of Oxygen content in purging area.

* Usable for all Purging Gases (except inflammables).

Optional:

*Software for PC interfacing.

* Interfacing with ORBIMAT C Power Source.

When using the orbital welding process, the most effective way to ensure a consistent and clean internal weld profile is use a back purge with a very low oxygen concentration. The only way to ensure that this oxygen concentration is low enough is to use an accurate measuring instrument.

In the past manual welders often used formulas with time, flow rate and volume which give very rough indications and which are not precise enough for many applications.

Even simple and low priced measuring units are no longer matching the requirements in Pharmaceutical, Biotechnology and Semiconductor Industry.

With the ORB 1001, ORBIMATIC has designed a system, which worked with high precision but nevertheless is very easy in operation and very economically priced.

furthermore the ORB 1001 allows optionally interfacing with all ORBIMATIC power-sources with several possibilities of process controlling as well as PC interfacing.

The ORB 101 is supplied in a tough ABS case with room to house all accessories and leads. this makes the unit easy to transport and store.